Vrei sa primesti notificari de la Bestauto?

Trimite unui prieten

Trimite

Tester pentru lichid de frana

35 RON
Valabil din 21.01.2020 15:18:19
Specificatii
Descriere

Se testeaza calitatea hidraulica a lichidului de frana la automobile, camioane, motociclete. Ledurile cu diferite coduri de culoare indica nivelul de umiditate din lichid si daca este necesar sa fie schimbat. Potrivit pentru lichid de frana DOT4. Lungime 150 mm. I



Caracteristici:

- tester profesional pentru verificat calitate lichid de frana
- este compatibil cu toate tipurile de lichiduri de frana pana la cele mai moderne
- detine indicator pentru nivel baterie si 4 nivele pentru calitate lichid de frana numerotate cu 1% , 2% , 3% , 4%
- indicatorul de calitate se aprinde in 3 culori verde , galben si rosu in functie de valoarea masurata



Tester Features:
Five LED indicators show the test results more accurate.
Testing DOT 3, DOT4, DOT5 brake fluid
Press the switch to turn on the power, the green LED light that represents the battery properly, the green light does not shine on behalf
To replace the battery
Automatic shutdown

Technical parameters:
Green: Battery OK, that is, brake fluid does not contain water
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.

Tester Specification:
1, check the car brake oil quality
2, 5 LED lights display the percentage of moisture content in brake fluid
3, auto power off
4, 1 LR03 AAA batteries (not included)

Tester Instructions:
Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid.
It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance.
Red indicates the brake fluid needs immediate replacement,
Green represents good condition,
Yellow indicates the state is acceptable but soon replaced.

1, the green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified
2, the yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later
3, the red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced Red LED: change brake fluid
4, LED red flashing: battery replacement
5, LED yellow: low moisture content, check again in six months
6, LED green: brake fluid lines / cell row

Package Included:
1 x Brake Fluid Test

Anunturi recomandate

Adauga fisier

Fisierele acceptate sunt: jpg, jpeg, png, gif cu o marime maxima de 10Mb.

    Fa oferta
    Ati atins limita de mesaje trimise pe zi
    Pentru a putea trimite mai multe mesaje accesati abonamentul VIP
    ×
    Anuntul e salvat ca favorit!
    Vrei notificari in timp real pentru anunturile favorite?
    ×
    Anuntul a fost sters de la favorite!